01
Inspection and test plan hold points
Hold and witness points are built into the production route; the next stage stays locked until the inspector signs off.
Module highlight · Real-time quality
Real-time quality management (QA/QC) for steel structures
Inspection, welding control and non-conformances are recorded at the moment they happen and linked to the member, the welder, the WPS and the photo. Quality stops being a pile of forms and becomes live data.
Built for: QA/QC managers, inspectors, welding coordinators
LiveHold point · Fit-up inspection passed
LiveNCR-0142 opened · Weld undercut
0paper inspection forms
1 scanto see the full quality history of a member
100 %of welds linked to a qualified welder and WPS
Key capabilities
QC hold points, NCRs and welds, as they happen
02
Digital NCRs with photos
Open a non-conformance from the phone, attach photos, assign the root cause and corrective action, and track it to closure.
03
WPS-controlled welding
Only welders qualified for the procedure, position and material can confirm a weld; certificates and expiry dates are checked automatically.
04
Dimensional and visual checks
Checklists per stage with tolerances, measured values and pass or fail, recorded against the exact member.
05
Live quality dashboard
First-pass yield, open NCRs, repair rates and inspector workload by project and by team, updated in real time.
06
Audit-ready MDR
The manufacturing data record, certificates and inspection reports are compiled automatically for the client and the auditor.
A member cannot move past a hold point until it is inspected and approved, so defects are stopped at the station, not discovered on site.
Why it stands out
Real-time quality
Inspection, welding control and non-conformances are recorded at the moment they happen and linked to the member, the welder, the WPS and the photo. Quality stops being a pile of forms and becomes live data.
Book a demoQuality built into the flow
Inspections happen in the production route itself, not in a separate system someone has to remember.
Evidence, not promises
Every result carries who, when, where and a photo, protected by an append-only history.
Fewer repairs on site
Defects are caught at the station where they are cheapest to fix.
Standards-ready
Structured for ISO 3834, EN 1090 and AWS D1.1 style documentation and traceability requirements.
How it works
Real-time quality
- 1
Define the inspection plan, hold points and welding procedures.
- 2
Inspectors and welders record checks and welds by scanning the member.
- 3
Non-conformances are raised, assigned and closed with evidence.
- 4
The MDR and quality KPIs build themselves for clients and auditors.
Explore the other modules
Real-time production
Every tonne, every station, live
ExploreGlobal project management
Hundreds of partners, many countries, one live view
ExplorePacking management
Eligible-only packing, containers and sealed releases
ExploreSmart erection
Sequence, 4D and digital handover on site
ExploreTraceability
From mill certificate to installed member
ExploreSee your own model in PEB Studio
Send us an IFC export and we will walk your team through BOM, cutting plans, production tracking and packing on your project.